Planning information for eastern Idaho property owners. Final scope, design criteria and price are confirmed for your project.
Width: the distance across the gable end
Width affects how the open interior works and what the structure must span. A wider building can change the trusses, supporting assemblies and erection needs, so cost does not follow floor area alone.
The prototype offers widths from 24 to 60 feet and uses sample span factors. The picture changes proportionally with width; it is not an approved framing design. For unusual spans, an arena or a custom layout, start with Jed.
Length: the distance down the sidewalls
Added length increases space and generally adds roof, wall, floor and framing scope. Think about equipment length, work zones, turning room and future storage rather than filling every square foot on day one.
A 40 × 60 footprint is 2,400 square feet. Exterior dimensions do not guarantee identical clear interior dimensions. The drawing automatically fits the selected proportions into its frame; the camera scale changes so the whole building remains visible.
Eave height is not clear interior height
Eave height describes the sidewall-to-roof junction. Trusses, headers, door tracks, ceiling plans and other components affect the clear space inside.
Measure the actual vehicle or equipment, including anything carried on top, and tell Jed about lifts or future storage. The prototype uses a simple overhead-door headroom screen. Passing that screen does not establish actual clearance.
Roof pitch describes the slope
At 4:12, the roof rises four units for every twelve units of horizontal run. The designer offers 3:12, 4:12 and 6:12. A steeper choice changes the silhouette, ridge height and roof surface area.
Pitch is one part of a coordinated roof and structural design. It is not a substitute for address-specific snow, drift, drainage or roofing requirements.
Size the door around what goes through it
The menu includes selected 8, 9, 10, 12, 14 and 16 ft widths, with 7, 8, 10, 12 and 14 ft heights in specific combinations. Width is listed first. Every selected overhead door uses the same size, with its own wall assignment.
Door packages now have researched planning allowances for plain insulated sectional doors, standard track, installation and an opener. These are analyst budgets, not local supplier quotations. Exact brand, insulation performance, track layout and clearance still need review. Mixed sizes and specialty doors can be scoped with Jed.
See all sizes, allowances and research sources ↗End-wall versus sidewall doors
End walls are the gable ends; sidewalls are the eave sides running along the building’s length. Choose the total opening counts, then pick Front, Back, Left or Right for each overhead door, entry door and window. Left and right are named while facing the front of the building. Use the four exterior wall views, the two corner views or the floor plan to check the whole layout. The total counts stay the same when you move an opening.
Sidewall openings can need additional structure. The initial prototype allowance is 25% of the affected direct installed-door costs as a preliminary allowance, based on Jed’s input. Actual beams, columns, bracing and installation scope still require review. The usual opening-framing allowance is listed separately.
The automatic layout reserves 3 ft at each wall end and 3 ft between all openings, with 2 ft above overhead doors and 1 ft above entry doors and windows. These are conservative prototype planning screens, not code requirements or engineered clearances. Doors and windows compete for the same horizontal wall space; the tool pauses the total if they do not fit. Moving openings to other walls, increasing the building dimension or reducing the count/size can resolve the conflict. Custom spacing, stacked windows and mixed overhead-door sizes require a conversation with Jed.
Walk-in entry doors
A personnel door provides everyday access separately from the overhead openings. Think about where you park, approach the building and move between work areas.
Every selected entry door appears on its assigned wall and adds sample installed entry-door and framing allowances. The intended use and actual design establish access and egress requirements; selecting zero in a budget tool does not determine what is permissible.
Daylight and the working layout
The sample window is a nominal 3 × 4 installed unit. Decide where daylight is useful, where wall storage needs to remain clear and whether the building will be conditioned.
Flashing, installation and performance belong in the final scope. Each selected window appears on its assigned wall and on the floor plan. The current window scenario uses a 4 ft sill, a 4 ft height and automatic horizontal spacing. The wall views are all viewed from outside, so their left edge is the reference for the saved opening schedule. Final locations must be coordinated with framing.
Sources & further reading
- National Frame Building Association engineering resources — system design context.
The dimensions, door allowances and sidewall addition above describe this prototype and owner-supplied planning assumptions. They are not manufacturer specifications.
Prototype cost examples describe the current sample model. They are not engineering specifications or published Redstone bids.
