Your barn. Your way.
Start with the popular 40 × 60. Make it yours.
Selected scope & drawing limits
The exterior and floor plan show dimensions, roof pitch, openings and color bands. Insulation, reinforcement, foundations, structural loading and earthwork are described here; they are not engineered in the drawing. Wainscot and finish premiums still need pricing.
Keep your width and length. Compare height, openings, floor and insulation using the same site assumptions. Sample planning totals; unpriced extras still need review.
Make room for your plans.
Exterior planning dimensions. Final usable space and clearances depend on the engineered assembly.
- 24–40 ftSmaller-span planning choices in this prototype.
- 48–50 ftA wider-span sample structural and erection factor applies.
- 60 ftThe prototype uses another sample span factor. Final assemblies need engineering.
- 24–120 ftChoose exterior planning dimensions. The proportional drawing fits your current design; usable interior space is different.
- 10–12 ftOften limits taller equipment and overhead-door headroom.
- 14–18 ftAdds wall area and height allowance. Door tracks, headers, trusses and equipment still need clearance review.
- 3:123 units up for 12 across; the shallowest option shown.
- 4:124 units up for 12 across; the default planning shape.
- 6:126 units up for 12 across; a steeper shape with more roof area.
Need an arena, a span over 60 feet, a lean-to, or living quarters? Call Jed for a custom scope.
Bring the big things in.
Choose a standard width × height. The same size applies to every overhead door; choose its wall below. For mixed sizes, talk with Jed. Taller equipment needs measured clearance, including roof-mounted accessories.
- 7–8 ft highVehicle-garage options. An 8 ft opening passes the 10 ft eave-height planning screen; actual header, track and opener space still need supplier review.
- 10–14 ft highTaller shop, equipment and RV planning choices. Measure the vehicle and accessories; a door label does not guarantee passage.
- Installed planning allowancePlain insulated sectional door, standard track, weather seals, door installation and an installed opener. Framing, special tracks, new electrical work and final project pricing are separate.
- 0No large doors; entry doors are a separate choice.
- 1–3Each adds a door assembly, installation and opening-framing allowance. Fit is only a preliminary screen.
- 0No walk-in door allowance selected; access/egress must still suit the intended use.
- 1–3Adds an installed standard entry-door and opening-framing allowance for each.
- 0No windows in the selected scope.
- 1–8Adds an installed window and framing allowance for every selected unit. All are shown in their assigned wall views and the floor plan. Framing, flashing and performance still require review.
Plain insulated steel sectional door, standard track, seals, installation and a size-appropriate opener. Door insulation is independent of the building enclosure choice. Premium colors, glazing, special tracks and new electrical work need a separate quote.
Compare door sizes, pricing & sources ↗Entry doors and 3′ × 4′ windows are standard planning allowances. For other sizes, styles or premium brands, discuss a custom opening package with Jed ↗.
Build for how you’ll use it.
- No interior floorNo interior floor allowance; structural footings remain.
- Gravel finishA simple aggregate floor allowance, without a concrete slab.
- 4″ concreteA 4-inch slab package planning allowance, including standard base/vapor retarder/placement/finish. Suitability needs review.
- 6″ reinforced concreteA thicker, reinforced-slab allowance. Lifts, point loads, reinforcement and foundation details still need a design.
- Uninsulated shellEnclosed building without an insulation allowance. Condensation details still matter.
- Insulated enclosureAdds a sample enclosure allowance; no specific R-value or engineered assembly is promised.
- Insulated + steel linerAdds insulation and an interior steel finish allowance. Mechanical/electrical work remains separate.
Concrete allowances include a standard prepared base, vapor retarder, placement, and finishing. Reinforcement and loading must be engineered. We do not assume a 4″ slab is suitable for your equipment.
The land is part of the plan.
- Ririe / nearby valleyLocal planning allowance.
- Rigby / Idaho Falls / RexburgCorridor planning allowance.
- Swan Valley / Teton ValleyA larger travel allowance and individual site/design review.
- Other / undecidedProvisional travel allowance; Jed confirms service availability.
- Not reviewedA provisional per-square-foot allowance while the land remains unverified.
- Prepared pad / $0No bulk earthwork in the selected scope; pad acceptance, foundations and floor still matter.
- Level / accessibleA sample light-preparation allowance.
- Some gradingA larger sample preparation allowance.
- Difficult siteA higher sample allowance; major earthwork may exceed it.
- Raised pad / floodplainStarts with the builder-reported roughly $20,000 example as a preliminary allowance. It does not design fill or establish permission to build.
- UnknownLeave this selected until Jed reviews the address and design requirements.
- BaselineReference structural budget; not a confirmed snow-load rating.
- Increased (+15%)A larger structure-and-footing allowance for comparison; the percentage applies to that package rather than the whole project.
- Higher (+30%)A higher structure-and-footing budget scenario. Actual loads and engineered components still require confirmation.
- FlexibleExploring options and budget.
- Within 6 monthsAsk Jed about capacity, lead times, approvals and site readiness.
- 6–12 monthsDiscuss a realistic planning sequence and when prices should be refreshed.
Snow load: what your roof has to carry.
Snow load is the weight of snow a roof must be designed to carry, usually expressed in pounds per square foot (psf). Your address, elevation, exposure and roof shape matter; wind can pile snow into drifts.
Engineering checks the roof and the load path through trusses, posts, connections and footings. More demanding conditions can mean additional design work, heavier components or different details. That is why snow-load requirements can change the price.
These choices compare structural budgets, not psf ratings or optional safety levels. Every project must meet its site-specific requirements; Jed and the design team confirm the final scope.
How snow load affects your building ↗Site-prep questionnaire0 of 25 topics answered
On a hill? In a floodplain? Preparing the pad yourself? Work through the questions below to identify extra scope early. “Not sure” is a useful answer. Your selections save with your design. Use “Text Jed my design” to review and send them from your messaging app.
Read the site-preparation guide ↗Explore snow load, wind, clear spans, door openings and the structure that carries those forces to the ground.
Compare structural budget scenarios ↗What happens after the estimate?
Text Jed your design and site-prep answers, or call him with your property location and plans. He’ll review the site, design requirements, suppliers, and scope, then prepare the final written proposal. The online price is a planning aid and remains subject to his approval.
What your planning estimate includes ↗